Handheld Gas Power Broom Sweeper Artificial Driveway Turf Grass Brush Portable

  
Handheld Gas Power Broom Sweeper Artificial Driveway Turf Grass Brush Portable. Outdoor Hand Held Gas Power Broom, 52cc Gasoline Broom Walk Behind Sweeper. Sweeping Method: Roller Brush Sweeping. Fuel Tank Volume: 1000ml/ 0.22Gal. 2-Cycle Oil /Gasoline Mixing Ratio: 1:25. Engine Type: Single Cylinder, 2-Stroke Air-Cooled Gasoline Engine. The Ratio of Brush Reducer: 40:1. Sweeping Width: 52cm/ 20.47in. Connecting Rod Length: 135cm/53.15in. Protective Cover Size: 6035cm/ 23.6213.78in. Brush Head Size: 5223cm/ 20.479.06in. Engine Size: 241325cm/9.455.129.84in. Package Size: 1084030cm/42.5215.7511.81in. Gross Weight: 15.25kg/33.62lbs. Our floor buffer machine sweeper features a high-quality nylon brush head and a powerful 1.7KW motor that is hard-wearing and consistently efficient. The handheld side-mounted design makes it easy to operate, and the brush head sweeps a width of 20.47in, which ensures that a large amount of area can be swept in a shorter period, making your yard even tidier with this product. User-friendly Designs: The air filter with double-layer sponge filtration allows for a more thorough blocking of dust. The internal silencer reduces noise when working, providing you with a relatively more comfortable working environment.

And the equipped goggles will keep you safe. Easy to Operate: With an overall length of 71.65 and a convenient front handle, this sweeper can be used with people of different heights, making it easy for you to maneuver. Easy to Assemble: The main body of this sweeper is already assembled, all you need to do is to install the connecting rod, brush head section, and handle. Customer Service: Our goal is to provide high-quality products and services. We will reply as soon as possible and solve the problem for you.

The curved handle on the connecting rod has a comfortable grip, allows you to operate the sweeper better, and reduces the difficulty of cleaning work. Its fuel tank capacity is 0.22Gal, which allows you to get rid of the trouble of frequent refueling. It effectively protects you from being hurt by sand, dust, small stones and branches, etc. It is an outdoor cleaning tool for driveways, yards, turf lawns, sidewalks, golf fields, soccer fields, and other places. It is widely used in artificial turf combing, fall, quartz sand leveling, sweeping the thin layer of dust and blood on the walkway, or for brushing off the moss of colorful tiles, etc. Please clean the air filter sponge once every 20 working hours. Please open the engine hood to remove dust from the cylinder and other parts after 50 working hours. Spark Plug: Please remove and clean carbon deposits and replace them if necessary after 50 working hours. Silencer: Please dismantle and clean the carbon deposit at the joint of the cylinder after 200 working hours, and pay attention not to let the carbon deposit and sundries fall into the cylinder. If it is not used for a long time, it is necessary to drain the fuel in the oil bubble. Clutch: Please open the connecting plate after 200 working hours, and check the wear of the clutch, according to the use of the situation to determine whether it needs to be replaced. Gearbox: Please add lubricating grease once every 50 working hours. Please regularly check whether the screws at each part are loose. Transmission Shaft: Please apply lubricating grease once every 100 working hours (especially at spline teeth at both ends). Please read the operating manual and label carefully before installation and use.

The brush head will turn only when you start the engine and increase the throttle. Please check the assembly of the drive shaft before use.

The drive shaft is divided into two parts, one part is mounted on the engine and one part needs to be mounted on the brush head by yourself. If the brush head part does not have problems, then you can check the engine part. Please note that the shaft and aluminum tube must be installed in place, and then tighten the long screws to fix, test the transmission is normal, and then replace the short fixing screws (the transmission shaft has oil-impregnated bearings, sometimes a small amount of oil is normal).

If the machine will not start, please check the fuel mixture, make sure that the pressing-on oil bubble has drawn oil into the carburetor, make sure that the kill switch is in the "ON" position, or you can flip down and open the blocking door and try a quick pull. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal.

We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount.

Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday.