Gasoline Engine Water Pump, 2-inch Gas Powered Water Transfer Pump, Portable High Pressure with 24.61ft Hose for Irrigation Pool. This gas engine water pump is mainly crafted from top-quality cast iron and aluminum alloy and adopts a high-performance 4-stroke engine with 212cc displacement, offering superior power, efficiency, and durability. Whether you are seeking to supply water to the farmland, irrigate lush vegetation, or extinguish fires, this marvelously constructed device will surely come to your aid and exceed your expectations. Gasoline Engine Water Pump Model: WP-20.
Material: Cast Iron and Aluminum Alloy. Engine: 4 Stroke, Single Cylinder, Air Cooled.
Ignition Mode: Non-contact Transistorized Ignition. Fuel Tank Running Time: About 5 hours. Gasoline Type: 90# and above(Not Included).Emission Control Durability: About 600 Hours. Factory Intensive Test Time: About 1000 Hours.
Fuel Tank Capacity: 3.6L/0.95Gal. Oil Tank Capacity: 0.6L/0.16Gal.
Hose Length: 7.5m/24.61 ft. Product Size: 4937.540.5cm/19.2914.7615.95inch. Package Size: 50.538.543cm/19.8815.1616.93in. Gross Weight: 21kg/46.3 lbs.Net Weight: 17kg/37.48 lbs. Build to Last: The product is made of high-quality cast iron and aluminum alloy, making it solid and durable, so it can adapt to difficult environments, such as in the mountains or forests, and can keep beautiful and practical for a long time. High Efficiency: The 4KW four-stroke engine with 212cc displacement, 3600rpm high speed, 2-inch diameter outlet and inlet, and 12/250 N. M large torque can provide a flow rate of up to 264Gal/min and 85.3ft lift, improving efficiency and saving labor. Thoughtful Design: The impeller can handle particles up to 1/3-inch in diameter, the O-rings ensure excellent sealing performance, and the hoops can firmly fix the hose to reduce leakage. Long Stand-by: The fuel tank of 0.95 gals in capacity allows the machine to run efficiently for about five hours, and you can use it to do a lot of pumping work without refilling the pump frequently. Good Heat Dissipation: The air-cooled engine, aluminum alloy material, and multiple uniform cooling holes can timely dissipate heat, ensuring continuous operation without overheating and extending its service life. Cordless Design: The cordless design and gasoline power source make this product more suitable for outdoor use without the need for connecting cables and electricity, with high flexibility. Low Noise: Low noise level(about 66 dB) for a four-stroke engine will not produce too much noise, equivalent to traffic noise next to an ordinary city street, creating a good working environment for you. Easy to Install and Use: The product has been 85% assembled, together with the complete accessories and English manual, you can install it easily. It adopts manual start, and the throttle and flameout switches make it convenient for you to operate. Protective Packaging: The air bubble films and plastic bags can better protect your product from normal scratches and dust during transportation to a certain extent.
Customer Service: We aim to provide quality products and services. We will reply and solve the problem for you as soon as possible. Long Hose: The 24.61ft long hose allows for long-distance pumping and large-scale irrigation. Practical Filter: It keeps debris from entering the pump body during operation, prolonging the service life of the product.
Shock-absorbing Pads: The four non-slip foot pads can reduce vibration and avoid sliding during operation, bringing you a better user experience. Lay the machine flat and fill it with oil (not included) until just a little oil overflows, as too much or too little oil will affect operation. Add #90 or higher gasoline (not included). Fill the pump head section with water until the water overflows from the outlet. Toggle the red flameout switch to the "ON" position.
Adjust the throttle switch and air vent switch to the left and the fuel line switch to the right. Pull a small section of the puller cable out first, and then pull the puller quickly to start the machine. Finally, connect the water inlet and outlet.
Please change the oil after the first use of 5-10 hours, otherwise, the impurities in the oil during the break-in period will seize the crankshaft. Please use the correct model, genuine, and clean engine oil. Please add unadulterated 90# gasoline or above to the fuel tank of the machine, add oil to the tank, and check the oil level before each use. We recommend that you use unleaded gasoline for the optimal performance of your product.
When the gasoline engine is working continuously, the crankcase temperature should not exceed 90°C. When heating, it should be shut down for 15-20 minutes before continuing to work, and when adding gasoline, it must be cooled down before proceeding.It is prohibited in high-speed shutdown. Please stop the machine when the throttle is at its lowest point! If the machine is not going to be used for a long time, please do not turn off the gasoline engine switch directly, but close the throttle door switch to consume the gasoline in the carburetor; otherwise, it will lead to oxidation of the carburetor. The carburetor plug generally does not need to be replaced, carbon deposits can be removed and scraped down with a razor blade(not included). Please use it outside, but do not operate it in the garage, in rain, water, or after watering, and do not open nearby doors or windows when operating it, and watch out for the high temperature. Please wash the filter cartridge with soapy water every 50 hours (every 10 hours if dusty), blow or gently tap the cartridge with compressed air and wait for it to dry before using it. Please check or replace the air filter cartridge periodically. Please read the English manual carefully before use and pay special attention to the safety tips on the label. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.