0.825, HP 4.8, CFM at 90 PSI 13.7, After-Cooler Included No, Air Outlet Size in. 1/4 quick connect, Drive Belt, Duty Cycle 100, Air Tank Size gal. 20, Dimensions L x W x H in. 40 x 21 x 33, Drain System Manual, Max.PSI 130, Portable or Stationary Portable, Engine Honda GX 160, Engine Displac.. 4 Yr Consumer/2 Yr Commercial.
The NorthStar® 20-gallon horizontal gas-powered portable air compressor is built for heavy-duty applications and long life. Belt-driven full cast iron single-stage pump features V-type cylinder design for superior cooling, Low Vibration Technology (LVT) for smooth operation and floating-type Swedish steel valves for long valve life. CFM at 40 PSI: 14.6, Fuel Capacity gal. : 0.825, Horsepower: 4.8, Dimensions L x W x H in.: 40 x 21 x 33, After-Cooler Included: No, Air Outlet Size in. : 1/4 quick connect, Drive: Belt, Duty Cycle: 100%, Air Tank Size gal. : 20, CFM at 90 PSI: 13.7, Max. PSI: 130, Portable or Stationary: Portable, Engine Displacement (cc): 163, Engine Idle Control: Yes, Low Oil Protection: Yes, Pump: Cast iron, Stage: Single, Start Type: Recoil, Tank Type: Horizontal, Engine: Honda GX160, Drain Type: Manual. Honda GX160 OHV engine with low oil shutdown.
Full cast iron pump for long service life. V-style cylinder design for superior cooling. Pump head made of FC35 Grade cast iron. Floating-type Swedish steel valves deliver much longer valve life.
Operates at slower RPM to run cooler and last longer. Low Vibration Technology (LVT) features a dynamically balanced pump for smooth operation and long life. One-piece cast iron crankcase has bearings on both ends of crankshaft for superior crankshaft support, not overhung crankshaft design. Oversized flywheel for cooler operation. Heavy cast iron flywheel provides extra momentum.Step-type piston rings ensure piston ring overlap for better compression. Sight glass for quick viewing of oil level. Replaceable crank journals and wrist pin journal/needle bearings. Two-piece connecting rods can be rebuilt for superior serviceability.
High pressure piston wrist pins have needle bearings. Easy start lever on unloader valve isolates pump from tank pressure, so engine won't have to start under load. Pressure regulator to control outlet pressure.
Built-in wheels with handle for easy portability. We bought this machine almost 2 years ago thinking it would tide us over until we bought a I/R compressor. It's been in the back of my service truck for the whole time. Actually replaced my truck itself and compressor is in our new one. We run a mobile diesel truck repair and welding company and it is our only compressor.
Plenty of power to take off 18 wheeler tires, even with a 1/2 Cornwall impact!! When it's cold you have to choke it, but that's to be expected. It's really got some miles on it, but has never failed me. BillA1952 from Los Angeles, Ca, Fontana.
I go to the Imperial sand dunes several times a year and when taking the truck into the dunes you need to air down. I always hated doing this because it would take some 2 hours to air up when getting ready to leave for home.
Now it takes less then 20 minutes to bring the tires up to normal pressure. The best part is this rig has plenty of power and just sips gas which as we all know in todays world really counts.
Well Built, More than Meets Expectations. Received compressor, put wheels and handle on - with loctite. Added oil and ran compressor for break-in as manual states.From empty tank - zero psi - to 130 psi and "ready to work" is 2 minutes. With line pressure regulated to 80psi and air line held open with a blowgun, compressor keeps up. With pressure regulated to 110psi, air line open with blowgun, compressor will fail to keep up and drop very slowly.
Compressor cut in is 100psi, cut out is 130psi. Idle at cut out is a very quiet, smooth idle.
Engine run up at cut in is not truly loud and engine runs very smoothly. From my calculations, measuring 8oz of fuel into the tank at a time and running to empty, a full tank should run more than 5 hours. This air compressor works great. It starts easy, its not to heavy to move around, and will run every tool i have hooked up to it.
I do alot of heavy work on trucks and equipment, and its great. I bought this to re-paint my motorcoach. It has been able to run the DA sander and all other tools including the spray gun without any problems. It is without a doubt more capable than the two previous 220 VAC electric air compressor that I have owned.
I really like the fact that I did not have to install a footing for it to sit on, and did not have to install a 50 amp 220 VAC line to plug it in to like I had to do for the previous air compressors I owned. This compressor has a smaller footprint than the two electric models I had, and is very easy to move around. It is very easy to start. We may already have an answer to your question! We reserve the right to correct ad errors and/or omissions.
Pricing and availability is subject to change without notice. The item "NorthStar Portable Gas-Powered Air Compressor 20-Gal Hor Tank 13.7 CFM @ 90 PSI" is in sale since Saturday, January 2, 2021. This item is in the category "Home & Garden\Tools & Workshop Equipment\Air Tools & Air Compressors\Air Compressors". The seller is "northerntool" and is located in Fort Mill, South Carolina. This item can be shipped to United States.